Plastics, Rubber, Resins and Adhesive Material Testing

Plastics, Rubber, Resins and Adhesive Material Testing

Send Inquiry

Plastics, Rubber, Resins and Adhesive Material Testing

Testing Parameter:


  1. Tensile properties (Tensile Strength, Modulus, Elongation)

  2. Flexural Properties (Flexural Strength, Modulus)

  3. Hardness (Shore Hardness, Rockwell, IRHD)

  4. Compression strength, Bulk modulus

  5. Izod Impact strength

  6. Tear Strength

  7. Abrasion Resistance

  8. Adhesive properties (Peel, Shear)


  1. Density

  2. Specific Gravity


  1. DSC (Melting point, Glass Transition, Specific heat, Heat capacity, Crystallinity, Oxidation Induction

    1. Thermal Analysis (DSC, DTA, TGA)


  2. TGA (Filler content, Weight loss, Thermal Stability, Acetate content of EVA)

  3. Coefficient of thermal Expansion HDT (Heat Distortion Temp.) & VSP (Vicat Softening Point)

  4. Thermal Stability and Reversion of PVC pipes




  1. MFI (Melt Flow Index)

  2. Intrinsic Viscosity

  3. Brook field Viscosity


  1. Identification and Decoding of Polymeric raw materials and Products

  2. Filler content/Carbon Black content

  3. Filler analysis

  4. Plasticizer Content

  5. Nitrogen content

  6. Moisture content

  7. Volatile Matter

  8. Migration tests for food and medicine packages

  9. Trace elemental analysis in polymers etc.

  10. Resistance to chemicals, acids, and alkalis

  11. Water Absorption

  12. Total solids

  13. Loss on heating

  14. Effect of liquids (Ageing of Rubber in Oil/Emulsions/Other Fluids )

  15. Ageing studies (Air/Humidity)

  16. Environmental Stress Cracking

  17. Trace elements (Pb,Cd,Sn,Hg,Mn,Fe,Cu etc)

  18. Acid value, Amine value, KOH number

  19. Rubber Hydrocarbon Content

  20. K value of PVC

  21. HCL gas generation

  22. Resistance to staining

  23. Total/ Free Sulfur content in Vulcanized Rubber


  1. Dielectric Strength

  2. Dissipation Factor

  3. Surface/Volume Resistivity

  4. Insulation Resistance

  5. Antistatic Properties


  1. Gloss

  2. Transmittance

  3. Delta E values

  4. Yellowness Index

Weathering Testing

  1. Colour fastness, Change in physic mechanical properties

  2. Xenon Arc Weather meter – Beta LM

  3. UV condensation

  4. Natural Weathering

Special Testing

  1. Flammability test (UL and other National and International Standards)

  2. Limiting Oxygen Index

  3. Smoke Density

  4. MVTR (Moisture Vapour Transmissions Rate)

  5. Ozone Resistance Test

  6. Unknown Sample (Total Analysis with it's Name) & Etc.